www.ptfeparts.com
www.ptfeparts.com | APTLON™ 61 PTFE Filled Compound |
 APTLON™ 61 Glass Filled PTFE Sleeve Bearings  |
APTLON™ 61: A PTFE compound that is a blend of virgin PTFE and a red glass filler. The primary filler is a short fiber glass added to increase wear resistance and compressive strength while maintaining a low coefficient of friction and resistance to corrosion. The addition of glass has a minimal effect on the electrical properties of virgin grade PTFE. Material Properties:
Note: The property data offered represents average
values obtained on laboratory test samples. Values listed are high limits.
Properties may vary based upon processing technique. Data should be
used only as a guide in selecting the appropriate compound.
Actual field performance will be affected by processing methods as well as end use service conditions. APTLON™ is a trademark of Applied Plastics Technology, Inc. |
Applied Plastics Technology, Inc.
45 Broad Common Road PO Box 45 Bristol, RI 02809 USA |
|
