Click to return to home page
www.ptfeparts.com

APTLON™  110   PTFE Filled Compound
Glass Fiber & Molybdenum Disulfide (Moly) Filled PTFE
We accept Visa, MasterCard & Amex
Call us toll-free
(800) 752-7082
or email
info@ptfeparts.com


APTLON 110 Parts
APTLON™ 110
Molded Rough Stock
Ready for Machining


Plastic Parts - Variety
     APTLON® 110 Glass & Moly Filled PTFE
APTLON™ 110:

A PTFE compound that is blend of virgin PTFE and a combination of glass fiber & molybdenum disulfide fillers.

The primary fillers are glass fibers and a metallic element added to increase resistance to deformation under load, and to increase strength and wear resistance.


Material Properties:
  • Tensile Strength:
    2200-2800 psi
  • Elongation:  200%
  • Specific Gravity:  2.23-2.28
  • Hardness, Shore D:  57-60
  • Deformation:
    2.0 - 4.0%  (24 hr, 78 deg. F, 2000 psi)
  • Water Absorption:  0%
  • Coefficient of Friction:  .08 -.10  (dry, static)
  • Coefficient of Friction:  .15 -.27  (dry, dynamic)

Note: The property data offered represents average values obtained on laboratory test samples.  Values listed are high limits. Properties may vary based upon processing technique. Data should be used only as a guide in selecting the appropriate compound. Actual performance will be affected by processing methods as well as end use service conditions.



APTLON™ is a trademark of Applied Plastics Technology, Inc.
Applied Plastics Technology, Inc.
45 Broad Common Road
PO Box 45
Bristol, RI 02809  USA
(800) 752-7082
(401) 253-0200, Fax: (401) 253-0474
email: info@ptfeparts.com
About Us | Processing | Machining | Stock Shapes | Materials | Customer Service | Teflon® Resin Info | Home
•  Site Map  •  © Applied Plastics Technology, Inc.  •  Terms of Use  •  Privacy Policy  •
Home Page Teflon Info Customer Service Company Information Parts Examples PTFE Molding Process CNC Machining Materials